Call 215-942-2739

Visit Our Mobile Site

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

COMMERCIAL SECTIONAL DOORS

 

CHI MODEL - 3240

Ribbed Steel - 24 Gauge, Uninsulated

  • 2" thick sections constructed of pre-finished galvanized steel
  • Insulated models feature either heavy duty vinyl or 27 gauge steel backers
  • The steel characteristics and thickness used in models 3250/3251/3252 are equivalent to the "nominal 24 gauge" classification used by other manufacturers in the door industry
  • Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection
  • Tongue and groove meeting rails provide superior rail strength and weather resistance
  • Glass is available in 1/8" DSB, 1/8" Lexan, Insulated or 1/4" tempered glass
  • Glass is easily replaced or substituted by removing molded frames
  • Exhaust port is optional for bottom section
  • Track options include 2" or 3" bracket or clip angle mount and designed to accommodate virtually any headroom design requirements
  • Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers
  • Bottom U-shaped astragal in an aluminum retainer is standard
  • Increased windload requirements may be specified

All models are available in finishing coat of white. Additional sandstone, brown and gray finishes are available in models 3240/41/42 ONLY

 

CHI MODEL - 3285

Polystyrene Sandwich Doors

R-Value: 10.29

  • 26 gauge face and 27 gauge back steel are mechanically locked and bonded to a CFC free polystyrene core with urethane adhesive for maximum structural integrity

  • Tongue and groove meeting rails provide superior joint strength and weather resistance

  • Concealed hinge attachment plates run the full height of sections for superior strength

  • Rigid exterior end stiles are finish painted white

  • Glass is available in 1/8" float, 7/16" insulated or 1/4" tempered glass

  • Glass is easily replaced or substituted by removing molded frames

  • Exhaust port is optional for bottom section

  • Track options include 2" or 3" bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

  • Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

  • Bottom U-shaped astragal is standard

  • Increased windload requirements may be specified

Available in finish coat colors of white, almond, sandstone or brown

 

CHI MODEL - 3216

Polystyrene Sandwich Doors

ASTM C518 tested R-Value: 17.54*

  • Foamed-in-place CFC free polyurethane core permanently bonds the 26 gauge face and 27 gauge back steel to form a rigid homogeneous section

  • 2" thick sections are thermally broken to eliminate convection

  • Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration

  • Concealed hinge attachment plates run the full height of sections for superior strength

  • Rigid exterior end stiles are finish painted white

  • Glass is available in 7/16" insulated or 1/4" tempered glass

  • Glass is easily replaced or substituted by removing molded frames

  • Exhaust port is optional for bottom section

  • Track options include 2" or 3" bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

  • Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

  • Bottom U-shaped astragal is standard

  • Increased windload requirements may be specified

  • Available in finish coat colors of white, brown, sandstone and almond

*R-value testing is in accordance with ASTM C518 standards.

   
   

Note: We have many other products to help you enjoy the full functionality

of your garages and openers just email us for more information

 

2012 Edge Unlimited Productions, LLC. all rights reserved Apex Overhead Door 

Site Map | Policy Notice  | Terms Of Use