COLD STORAGE DOORS

or offers unique designs, features and benefits that keep it in high demand throughout the industry. Our standard door panel and face casing are woodless. Features Diamond-Trac® Roller System: This patented system elicits rave reviews from industry experts and customers. It permits a smooth, quiet gliding action unrivaled in any door of its type. Its superior sealing ability is due to its down-and-in motion that pushes the door tightly against the gasketed casing and floor. Extruded aluminum door frame: Provides strength superior to wood. Versatile: Designed to handle applications up to a 100F delta T, and available with many options. Standard panels: White, stucco-embossed #26 gauge galvanized steel, front and back. Gaskets: Tear resistant adjustable frame gaskets. Flexibility: Closer positioning of doorways also provides critical floor and wall space savings. Easy Installation: With track and angles preassembled on our casings, installation is quick and easy. 5-year limited warranty Cooler Door Specifications Supply where indicated on plans Jamison Mark IV® Manual Single Leaf Horizontal Sliding Cooler Door, with Diamond-Trac® System*. Door leaf to have aluminum extruded structure and to be metal clad with #26 gauge white pre-painted stucco embossed steel front and back. Frame (casings and header) to be constructed of aircraft quality aluminum extrusions with white painted finish. Door leaf to be filled with 4" of Jamifoam non-CFC polyurethane insulation with an R value of 28 at 40°F. Frame to be insulated with polystyrene inserts. Adjustable gasket at sides and head of frame to be polyester reinforced; sill gasket on door to be sweep type. Hardware to have protective coating against corrosion. Freezer Door Specifications Freezer door specifications to be same as cooler door except for these substitutions and additions: Supply where indicated on plans Jamison Mark IV® Manual Single Leaf Horizontal Sliding Freezer Door with Diamond-Trac® System*. Provide Frostop heater cables in top, sides, and bottom of door. Complete device to be assembled, ready for connection to 120 volt, 60 Hertz, single phase AC line. Special Notes: Freezer Door is designed for installation in warm room with temperatures above +33°F. If door must be mounted in rooms with temperatures of +32°F. and below, contact factory. When cold room temperature is below -20°F. and /or the relative humidity is greater than 80% on the warm side, Frostop heater cables should be added to the frame/gasket assembly. If the cold room temperature is below -40°F., or if the temperature difference exceeds 90°F., contact factory.

With a Powertron® DS Operator, the Food Pro opens a 40” single-leaf door in just one second. A double-leaf door opens 80” a second. Its incredibly smooth and quiet operation is unmatched in the industry. Our standard door panels and face casings are woodless.

Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry. The Dual Speed (DS) operator opens at up to 80" per second. Features Powertron® Operator: The most popular power operator in the history of cold storage. Tested trouble-free through more than 2 million opening/closing cycles. Diamond-Trac® Roller System:This patented system elicits rave reviews from industry experts and customers. It permits a smooth, quiet gliding action unrivaled in any door of its type. Its superior sealing ability is due to its down-and-in motion that pushes the door tightly against the gasketed casing and floor. Easy Installation: With track and angles preassembled on our casings, installation is quick and easy. Flexibility: Closer positioning of doorways also provides critical floor and wall space savings. Extruded aluminum door frame: Provides strength superior to wood. Versatile: Designed to handle applications up to a 100F delta T, and available with many options. Standard panels: White, stucco-embossed #26 gauge galvanized steel, front and back. 5 year limited warranty Cooler Door Specifications: Supply where indicated on plans Jamison Mark IV® "DS" Series Power Operated Bi-Parting Horizontal Sliding Cooler Door, with Diamond Trac® System* and PowerTron® Operator. Door leaves to have aluminum extruded structure and to be metal clad with #26 gauge white pre-painted stucco embossed steel front and back. Frame (casings and header) to be constructed of aircraft quality aluminum extrusions with white painted finish. Door leaves to be filled with 4" of Jamifoam non-CFC polyurethane insulation with an R value of 28 at 40°F. Frame to be insulated with polystyrene inserts. Door to be equipped with dual-speed brake motor designed to open door at 80" per second and close door at 40" per second. Door leaves to be equipped with low profile pneumatic reversing edge, effective full height and full travel of door. Upon contact, door in closing cycle is instantly reversed to open position. Adjustable gasket at sides and head of frame and reversing edges cover gasket to be polyester reinforced; door leaves to have sweep type sill gasket. Hardware to have protective coating against corrosion. Automatic opening to be provided with two remote control, spring-cushioned, low voltage pull switches. Door power to be 208, 240 or 480 volt AC, 60 Hertz, three phase. (ARCHITECT TO SPECIFY VOLTAGE.) PowerTron® power operator to have all gear drive, and all power controls to be fully enclosed in NEMA 1 control boxes. Visible signal light to show when motor is running. Complete door assembly to be ready for connection to power. (ARCHITECT TO DESIGNATE RESPONSIBILITY FOR FILED WIRING.) Freezer Door Specifications: Freezer door specifications to be same as cooler door except for these substitutions and additions: Supply where indicated on plans Jamison Mark IV® "DS" Series Power Operated Bi-Parting Horizontal Sliding Freezer Door with Diamond-Trac® System* and PowerTron® Operator. Provide Frostop heater cables in top, sides, lead edges and bottom of door. Complete device to be assembled, ready for connection to 120 volt, 60 Hertz, single phase AC line. Special Notes: Freezer Door is designed for installation in warm room with temperatures plus 33°F. and above. If door must be mounted in rooms with temperatures of +32°F. and below, contact factory. When cold room temperature is below -20°F. and /or the relative humidity is greater than 80% on the warm side, Frostop heater cables should be added to the frame/gasket assembly. If the cold room temperature is below -40°F., or if the temperature difference exceeds 90°F., contact factory.

Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry. Our standard door panels and face casings are woodless. Features Powertron® Operator: The most popular power operator in the history of cold storage. Tested trouble-free through more than 2 million opening/closing cycles Diamond-Trac® Roller System: This patented system elicits rave reviews from industry experts and customers. It permits a smooth, quiet gliding action unrivaled in any door of its type. Its superior sealing ability is due to its down-and-in motion that pushes the door tightly against the gasketed casing and floor. Easy Installation: With track and angles preassembled on our casings, installation is quick and easy Flexibility: Closer positioning of doorways also provides critical floor and wall space savings. Extruded aluminum door frame: Provides strength superior to wood. Versatile: Designed to handle applications up to a 100F delta T, and available with many options. Standard panels: White, stucco-embossed #26 gauge galvanized steel, front and back. Gaskets: Tear resistant adjustable frame gaskets. 5-year limited warranty Extruded aluminum door frame provides strength superior to wood. Designed to handle applications up to a 100F delta T Extremely versitle with many options Standard panels are white, stucco-embossed #26 gauge galvanized steel, front and back. Reversing edge is included with built-in sensing switch. Tear resistant adjustable frame gaskets. 5-year limited warranty Specifications Options & Accessories Also Available in Bi-Parting Power Fiberglass, Single Manual Fiberglass, Single Manual Fiberglass Track Door

The InVision® is a clear-paneled door for areas that require quick opening speeds and clear vision from both sides of the doorway. Deep vestibule design for higher humidity environments. Features Deep Vestibule InVision® Freezer Doors Variable speed drive provides smooth starts and stops Constructed of lightweight aluminum, and is extremely durable Easy-to-install Resists bacteria, mold, mildew and microbiological growth Control panel is UL listed 5-year limited warrant Clear ultraviolet-resistant vinyl panels are connected with Velcro. This provides a safe and easy way of re-attachment if forklifts or loaded skids penetrate and separate the panels. Unique cantilever design and larger top-guide rollers provide smooth, fast and quiet operation. The industry's best sealing system keeps cold air where it belongs - inside the cooler/freezer.

Digitally controlled fast operating door for high volume traffic. Features Opens at an incredible 96” per second Variable speed drive provides smooth starts and stops Constructed of lightweight aluminum, and is extremely durable Easy-to-install Resists bacteria, mold, mildew and microbiological growth Control panel is UL listed 5-year limited warranty Supply where indicated on plans Jamison Mark IV InVision® BiFolding, Power Operated, Cooler Door with PowerTron® Digital Controller. Door panels to be made of PVC vinyl, supported by anodized aluminum framing and retainers. Center panels to be transparent flexible 0.3" (7mm) thickness and side panels to be orange reinforced vinyl. Panels to be supplied with Velcro* seams. Casing frame, track angle, header, door panel frame and retainers to be T6063-T6 aircraft grade anodized aluminum alloy. Full width removable hood to be provided with gray painted finish. Vinyl gaskets to be provided at two sides and across head where door contacts casing frame. Hardware to have protective coating against corrosion. Heavy-duty side support hinges to have thrust ball bearing and center pivoting hinges to have oil impregnated bronze bearing. Large diameter heavy-duty dual trolley wheels and a #40 drive chain to be furnished. Door to be equipped with PowerTron Digital Controller, a maintenance free servo drive unit. Door to open at speed up to 100" per second. Control unit includes pre-programmed motor operation, automatic open and close limit setting system and intregated cycle counter. Automatic opening to be provided with two remote control, spring cushioned, low voltage pull cord switches. Door power to be 120, or 230 volt AC, 60 Hertz, single phase; or 208, 240, or 480 Volt AC, 60 Hertz, three phase. (ARCHITECT TO SPECIFY VOLTAGE.) Main control panel to be **UL® Listed NEMA 4X enclosure. Lockable disconnect switch to be provided. Control panel to be mounted on door and factory wired to motor. No field wiring required between control panel and motor. (ARCHITECT TO DESIGNATE RESPONSIBILITY FOR FIELD WIRING TO POWER SOURCE.) NOTE — Door may sweat depending on relative humidity on warm side and temperature differential from front to back of door.

The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components. Features Unique panel design Superior Trailing Edge Assembly for excellent door seal The Living Hinge—Panels are Independent of Carrier The Highest R-Value for a hittable door—Select from R10 to R32 The Industry’s Best Operator—Select between the dual speed Powertron® or the Powertron Digital Controller. Retrofitable panels—Exchange your Jamison Mark IV® hard door panels with flexible VersaFlex® hittable panels. Unique hittable panel design Using Jamison's unique patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck, sliding relative to one another versus being constructed as a solid panel. This innovative panel design is unlike any other, and allows the panel maximum flexibility when hit and quickly returns to its original form. The Shearflow™ design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components. Superior Trailing Edge Assembly for the best door seal The door panel is captured and pulled tightly against the casing when closed, creating an excellent seal against infiltration and eliminating ice build-up. The rigid trailing edge stiffener is selective in its work, providing an effective tight seal when the door is closed, but when hit, the edge is flexible enough to allow the panel to bend to the impact. The Living Hinge Door panels are secured along the top of the carrier with a unique flexible design that allows a continuous swing motion, and the flexibility to move the panels back and forth independently of the carrier assembly. There are no moving hinge parts to wear out or carrier components to replace after impact. All other hittable doors are made with a single semi-rigid core. Shearflow™ internal layers slide relative to one another when struck. The highest R-Value for a hittable door You choose the insulation value to best fit your opening. VersaFlex® comes in two models of R-Value, a standard core of R10, and an Ultra High R Core that provides up to R32. Ultra High R-Value cores are perfect for freezer applications where ice can be a challenge. You choose the Powertron® operator The Jamison Powertron® has been tested in over 2,000,000 continuous open and close cycles, and remains the most recognized and dependable door operator available. Select between the dual speed Powertron® and the more technologically-advanced Powertron Digital Controller. Retrofitable panels Exchange your Jamison Mark IV® hard door panels with flexible VersaFlex® hittable panels. Cooler models require panel replacement and simple door frame adjustments. On freezer models, you will need to add a heated gasket if not already present