SECTIONS

• Features four evenly spaced micro-grooves that run horizontally across each section.• 2” thick sections are foamed in place with polyurethane for superior R-value• Thermally-broken to eliminate thermal convection• Gasket seal between sections provide for an extremely tight weatherseal• Concealed steel back-up plates run from top to bottom of each section for secure hardware attachment• Bottom “U” type astragal is a standard feature• Available in white

TRACKS

• Tracks are 2” or 3”, as specified• Available in bracket mount, angle mount, clip angle mount, 12” radius, 15” radius, high lift, vertical lift, roof pitch, or dual track low headroom

HARDWARE

• Package includes 14 gauge or 11 gauge hinges, as specified• 2” or 3” short-stem or long-stem ball bearing rollers• Heavy-duty adjustable top roller bracketsSPRINGS• Torsion springs are helically wound with stress relieved, oil-tempered wire• Springs are individually calibrated for each door• Counter-balance torsion shafts are galvanized for rust resistance• High cycle spring options may be specified

INSULATION TYPE

• Foamed in place CFC free polyurethane core• R-value* – 17.54

LiftMaster’s KPR2000 is a feature-rich keypad and proximity card reader access controller that is simple to install and looks great, making it an excellent choice for both Residential and Commercial applications. Supports a maximum of 2,000 users in multiple access configurations. Supports HID 26-bit and 30-bit Wiegand proximity card formats. Designed for outdoor environments with a sealed, weather proof design allowing you to easily mount anywhere. Provides stand alone or pass-thru operation Latch Mode allows you to hold open a door or gate for an extended period of time. Includes Rapid Programming and Block Enrollment capability, “Add” and “Delete” program cards. Programmable Output Relay with adjustable contact time appropriate for Gate Operator, Commercial Door Operator, Door Strike or Solenoid Lock. Capable of networking two KPR2000s, PPWR to the KPR2000 or to most Access Control Systems.

The Model ASSD is a swift opening and closing motorized strip-door. Strip-door operation is easily adjusted to suit traffic speed. Features May be mounted inside the doorway or within the door jamb Recommended for doorways subjected to infiltration due to temperature differences Fully-lapped fixed strips retain 95% effectiveness Clear plastic strips significantly outlast push-through strips For negative pressure applications under 1 MPH flow-through velocity Can be used between 2 freezers without requiring any heat.

… gauge back 2” Thick Section 32’2” x 20’0” Spec Data Sheet 3236 Polyurethane 26.89 26 gauge front / 27 gauge back 3” Thick Section 40’2” x 20’0” Spec Data Sheet Section Drawing BIM Objects Product Flyer 3282 New! 1-13/16” Polystyrene 10.29 24 gauge front / 27 gauge back 2” Thick Section 28’2” x 20’0” 3-Part Spec Spec Data Sheet Section Drawing BIM Objects Product Flyer 3285 1-13/16” Polystyrene 10 …